WOVEN IRON ON NAME TAPES

INSTRUCTIONS FOR USE

Set the temperature of the iron to between Wool/Cotton. DO NOT USE STEAM. Make sure the garment is COLD. Place the Name Tape on a flat part of the garment then quickly and firmly stamp the HOT iron onto the Name Tape and hold still with firm pressure for twenty seconds. More pressure can be applied if you use the edge of the iron

IT IS IMPORTANT NOT TO HESITATE OR HOVER OVER THE NAME TAPE - THIS WILL CAUSE THE NAME TAPE TO CURL.

Do not move the iron around whilst counting for twenty seconds. Smooth out any crinkles AFTER the twenty second period has elapsed.

If the Name Tape has curled then the iron has not been hot enough or you have hovered over the Name Tape before placing the iron onto the tape.

Some garments may be considered too delicate for the temperatures required. In these cases the Name Tape can be applied to the garments own existing label or sewn on in the normal way.

If the Name Tapes curl then increase the temperature of the iron and/or increase the time holding the iron onto the Name Tape.

We suggest trying out on an old tea towel before applying to the garments. A Test Tape is supplied for this purpose.

Close